Modular 100 Ton Air Cooled Screw Water Chiller Cooling System With Hanbell Compressor
1. Adopt low-rotational radiating fan, which discharge the heat smoothly, so the noise level is obviously reduced. The unit control system adopts small vibration, easy to install. It is favorable for where is water shortage, and water -cooled tower is not installed.
2. According to load requirements, unit can realize automatic programmer control and saved the energy consumption. The human machine interface configures a full touch screen, which is accurate monitoring. Applies step and stepless capacity control to reach the maximum energy efficient ratio.
3. Imported special air-cooled (semi-hermetic) screw compressor with a famous brand, which is reliable operation, high efficiency, easy maintenance, exact volume control, and has a wide range of application. The system adopts the latest asymmetric rotor profile, build-in pressure drop lubricant to system with low vibration, low in noise, high performance.
4. Complete protection device: to prevent compressor starting frequently, over-current protection, overheat of motor protection, prevent freezing, sight glass in liquid, oil heating protection, phase protection. HV/LV protection, discharge high-temperature protection, safety value, soluble chock, water shut-off protection.
5. A full intelligent control system and non-stop running within 24 hours.
Modular 100 Ton Air Cooled Screw Water Chiller Cooling System With Hanbell Compressor Specification
Item |
Specification / Supplier |
||
Cooling capacity |
Model |
AYD-710A |
|
ton/h |
100 |
||
Power input |
kw |
128.2 |
|
Current |
A |
230 |
|
Temp Outlet (℃) |
7 |
||
Power Supply |
380V-3N-50HZ |
||
refrigerant control |
Expansion valve |
||
Refrigeration circle |
one |
||
refrigerant |
R134A |
||
Dimension(mm)L×W×H |
6000*2100*2200 |
||
Compressor |
Style |
Semi-hermetic screw type |
|
Quantity(set) |
1 |
||
Compressor Power(kw) |
115 |
||
Start Way |
0-25%-50%-75%-100% |
||
Condenser
|
Style |
Fin |
|
Air Volume(m3/h) |
144000 |
||
Fan Power(kw) |
13.2 |
||
Evaporator |
Style |
Shell and Tube / 1set |
|
Cold water flow(m3/h) |
65 |
||
Pipe size(DN) |
125 |
||
Protector Device |
1.Phase protector 2.Fan overload protector 3.High/low voltage protector 4.overheat protector 5.Anti-freeze protector |
||
Unit Weight(kg) |
3800 |
||
Main Parts | |||
Compressor |
Hanbell |
||
Electronic |
LG / Carlo |
||
Electromagnetically valve |
Emerson |
||
Expansion Valve |
Emerson |
||
Electrical control Board |
Punp |
Remark: This cooling capacity is based on evaporator temperature 2C,condensing temperature 50C.
Modular 100 Ton Air Cooled Screw Water Chiller Cooling System With Hanbell Compressor Diagram